Difficulty
Easy
Steps
2
Time Required
5 minutes
Sections
1
- Formatter
- 2 steps
Flags
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackHP LaserJet 1160/1320
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Left Side Cover
- Pull on the two tabs on the back of the printer to release the left side cover.
- Remove the cover by rotating it towards the front of the printer.
Pull on the two tabs on the back of the printer to release the left side cover.
Remove the cover by rotating it towards the front of the printer.
1024
Step 2
Formatter
- Remove 2 screws on the I/O port cover.
- Remove 6 screws on the formatter.
- Disconnect 3 connectors from the formatter.
- Disconnect 2 flat flexible cables from the formatter.
- Remove the formatter from the printer.
- Be careful not to fold, crease, or tear flat flexible cables.
- The I/O port cover will need to be transferred to the new formatter before installing it.
Remove 2 screws on the I/O port cover.
Remove 6 screws on the formatter.
Disconnect 3 connectors from the formatter.
Disconnect 2 flat flexible cables from the formatter.
Remove the formatter from the printer.
Be careful not to fold, crease, or tear flat flexible cables.
The I/O port cover will need to be transferred to the new formatter before installing it.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
jdp23
Member since: 08/22/2013
1,275 Reputation
23 Guides authored
Badges:
24
+21 more badges
R F Rossiter - Dec 20, 2020
Reply
Additional connector attached to bottom left of board ignored