Difficulty
Easy
Steps
8
Time Required
15 minutes
Sections
7
- Left Side Cover
- 1 step
- Right Side Cover
- 1 step
- Back Cover
- 1 step
- Top Cover
- 2 steps
- Duplexer Tray
- 1 step
- Cartridge Door
- 1 step
- Pickup Roller
- 1 step
Flags
1
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackHP LaserJet 1160/1320
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Left Side Cover
- Pull on the two tabs on the back of the printer to release the left side cover.
- Remove the cover by rotating it towards the front of the printer.
Pull on the two tabs on the back of the printer to release the left side cover.
Remove the cover by rotating it towards the front of the printer.
1024
Step 2
Right Side Cover
- With the printer turned so that the right side is facing upwards, use a metal spudger to disengage 3 tabs holding the right side cover in place.
- Lift the cover off of the printer.
With the printer turned so that the right side is facing upwards, use a metal spudger to disengage 3 tabs holding the right side cover in place.
Lift the cover off of the printer.
Step 3
Back Cover
- Remove 4 screws on the back of the printer.
- Remove the back cover.
Remove 4 screws on the back of the printer.
Remove the back cover.
Step 4
Top Cover
- Remove 2 screws on the back of the printer, one on the left, and one on the front.
- The second image shows the formatter removed, but it is not necessary to remove the formatter to replace the top cover.
Remove 2 screws on the back of the printer, one on the left, and one on the front.
The second image shows the formatter removed, but it is not necessary to remove the formatter to replace the top cover.
Step 5
Top Cover
- Disconnect the control panel cable and remove the top cover.
Disconnect the control panel cable and remove the top cover.
Step 6
Duplexer Tray
- Pull on the blue-green tab to release the duplexer tray.
Pull on the blue-green tab to release the duplexer tray.
Step 7
Cartridge Door
- Remove 2 screws from the front of the printer.
- Remove the cartridge door.
Remove 2 screws from the front of the printer.
Remove the cartridge door.
Step 8
Pickup Roller
- Remove the pickup roller by rotating the white tabs upwards and pulling them outwards.
Remove the pickup roller by rotating the white tabs upwards and pulling them outwards.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 1 other contributor
jdp23
Member since: 08/22/2013
1,275 Reputation
23 Guides authored
Badges:
24
+21 more badges
donrock102 - Jan 27, 2017
Reply
no need to remove any sides….
PCSG - Sep 18, 2017
Reply
Just go straight to step 8, that’s all you need to do!
sadowski72001 - Aug 9, 2019
Reply
Step 6 and Step 8 are the only steps necessary.
Dana Sandburg - Sep 4, 2020
Reply
Ok here is the pickup roller replacement procedure: 1. Turn off the printer and unplug the power cord and and network or USB cables; 2. Remove toner cartridge; 3. Remove paper tray; 4. Reposition printer on its back (the side where power/network/USB cables connect); 5. Release duplexer tray (step 6 in the procedure outlined above); 6. Using a needle-nose pliers, move the white handles outward and rotate them upward (first image in step 8 above); 7. Once you’ve rotated the white tabs so they look like picture 2 in step 8 above, pull them outward. The left tab will come off; 8. Move the rollers to the left and they will be free. 9. Reverse the steps to reassemble.
Javier Munné - Feb 3, 2021
Reply
No hay que desmontar nada. En este video lo explica.
No need dismount any part. Look at this video.
