Hp Laserjet Pro 200 Color Mfp Printer Roller Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          15 - 20 minutes

Sections

Printer Roller
9 steps

Flags

BackHP Laserjet Pro 200 Color MFP
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Printer Roller

Plug in the printer to a wall outlet and place the printer on an accessible surface.

Plug in the printer to a wall outlet and place the printer on an accessible surface.

1024

Step 2

In order to rotate the roller to the maintenance position, a secondary menu must be unlocked via the display.
To unlock this menu, click on Settings tab (the wrench icon in the top left corner).
Once in the Settings menu , quickly click and hold the mid left side of the display (orange square).
While continuing to hold the left side, click the bottom right corner of the display (yellow square) and hold it. This should you bring you right back to the startup menu.
Once again, click on the Settings tab.

In order to rotate the roller to the maintenance position, a secondary menu must be unlocked via the display.

To unlock this menu, click on Settings tab (the wrench icon in the top left corner).

Once in the Settings menu , quickly click and hold the mid left side of the display (orange square).

While continuing to hold the left side, click the bottom right corner of the display (yellow square) and hold it. This should you bring you right back to the startup menu.

Once again, click on the Settings tab.

Step 3

Once in the Service menu, click on the “2ndary Service” tab.
Scroll down by pressing the down arrow on the bottom right corner of the screen until you find the tab labeled “Pick Roller.”
Select “Pick Roller.”

Once in the Service menu, click on the “2ndary Service” tab.

Scroll down by pressing the down arrow on the bottom right corner of the screen until you find the tab labeled “Pick Roller.”

Select “Pick Roller.”

Step 4

Press the “OK” button on the bottom right corner of the screen.

Press the “OK” button on the bottom right corner of the screen.

Step 5

Unplug the printer from the side by pulling on the base of the cord.
Unplug the printer rather than manually turning it off using the power button in order for the roller to stay in maintenance position.

Unplug the printer from the side by pulling on the base of the cord.

Unplug the printer rather than manually turning it off using the power button in order for the roller to stay in maintenance position.

Step 6

Remove the paper tray by pulling it out from the bottom completely.

Remove the paper tray by pulling it out from the bottom completely.

Step 7

Rotate the printer as shown so that the front is facing your left.
Flip the printer so that its right side is facing down, and you are facing the bottom.

Rotate the printer as shown so that the front is facing your left.

Flip the printer so that its right side is facing down, and you are facing the bottom.

Step 8

Use a metal spudger or a small flathead screwdriver to lift the tabs on each side of the roller.

Use a metal spudger or a small flathead screwdriver to lift the tabs on each side of the roller.

Step 9

Pull out and remove the roller.

Pull out and remove the roller.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 5 other contributors

                    Kendall Gentzen

Member since: 04/18/2019

930 Reputation

                                      5 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       Cal Poly, Team S9-G14, Maness Spring 2019                        

                                                  Member of Cal Poly, Team S9-G14, Maness Spring 2019 



                    CPSU-MANESS-S19S9G14                     


                                            4 Members                     


                                            5 Guides authored

Jjay - Jul 3, 2021

Simple and exact.

James Herzog - May 22, 2022

I can not get the 2ndary Service menu to appear. I have followed these instructions very carefully. Is there another way to access this mennu?

Rixa - Jul 12, 2022

@James Herzog. I had to try at least ten times before I got that key sequence working. Try pushing bit different spots and bit different speeds etc.

Karen-Glenn Richardson - Nov 4, 2022

Lord God. This worked just as you instructed. I’m still ready to throw the printer to the curb, but this did work!!

Introduction#

What you need#

Team#

Introduction

What you need

Team