Hp Mini 110 3735Dx Hard Drive Replacement Repair Guide

Difficulty

Moderate

Steps

8

Time Required

                          2 - 5 minutes            

Sections

4

• Battery
• 2 steps
• Backcover
• 1 step
• Hard Drive Cage
• 3 steps
• Hard Drive
• 2 steps

Flags

1

Featured Student Guide

This guide has been the hard work of our awesome students and is found to be exceptionally cool by the iFixit staff.

• BackHP Mini 110-3735dx

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery               

• With the bottom of the HP Mini facing up, slide both switches inward towards each other.

With the bottom of the HP Mini facing up, slide both switches inward towards each other.

1024

Step 2

• With the left switch still pushed inward, pull the battery towards you to remove it from the computer.

With the left switch still pushed inward, pull the battery towards you to remove it from the computer.

Step 3

              Backcover               

• Pull upward from under the back cover via the missing battery area.
• Best to start from one of the corners.

Pull upward from under the back cover via the missing battery area.

Best to start from one of the corners.

Step 4

              Hard Drive Cage               

• Remove the three 5.0 mm screws holding the hard drive cage in place using a Phillips #1 screw driver.

Remove the three 5.0 mm screws holding the hard drive cage in place using a Phillips #1 screw driver.

Step 5

• Lift the hard drive cage by pulling the tape upward.
• Start by pulling the tape from the side with the keyboard symbol.

Lift the hard drive cage by pulling the tape upward.

Start by pulling the tape from the side with the keyboard symbol.

Step 6

• Unplug the cable connecting to the hard drive.

Unplug the cable connecting to the hard drive.

Step 7

              Hard Drive               

• Remove the four 4.0 mm screws on both sides of the cage using a Phillips #1 screw driver.

Remove the four 4.0 mm screws on both sides of the cage using a Phillips #1 screw driver.

Step 8

• Gently remove the hard drive from it’s cage.

Gently remove the hard drive from it’s cage.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 2 other contributors 

                    Tyrone Williams                     

Member since: 03/10/2016

905 Reputation

                                      7 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges                           

Team

                       UMass Dartmouth, Team 4-1, Catania Spring 2016                        

                                                  Member of UMass Dartmouth, Team 4-1, Catania Spring 2016 



                    UMASSD-CATANIA-S16S4G1                     


                                            4 Members                     


                                            7 Guides authored