Difficulty

Moderate

Steps

9

Time Required

                          10 minutes

Sections

3

  • Battery
  • 2 steps
  • Bottom Cover
  • 3 steps
  • Wireless Card
  • 4 steps

Flags

0

  • BackHP Mini 210-1199DX

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Unplug the netbook.
  • Secure the netbook in a upright position.
  • Slide the plastic battery latch that secures it into the netbook.
  • Keep thumb secure on the right tab as you begin to remove the battery.

Unplug the netbook.

Secure the netbook in a upright position.

Slide the plastic battery latch that secures it into the netbook.

Keep thumb secure on the right tab as you begin to remove the battery.

1024

Step 2

  • Remove the battery from the device.

Remove the battery from the device.

Step 3

              Bottom Cover
  • Press down on the two orange buttons to release.
  • If the case does not pop off, begin to use Spudger to pry the case off the back.

Press down on the two orange buttons to release.

If the case does not pop off, begin to use Spudger to pry the case off the back.

Step 4

  • Place the spudger on corners and openings in order to begin removal of the back.
  • Continue this on all corner until the case comes fully off of the back.

Place the spudger on corners and openings in order to begin removal of the back.

Continue this on all corner until the case comes fully off of the back.

Step 5

  • Pull the case off of the device

Pull the case off of the device

Step 6

              Wireless Card
  • Locate the Wireless Card.

Locate the Wireless Card.

Step 7

  • With fingers or tweezers, carefully pull the black and white wire connectors from their sockets and move them to the side.

With fingers or tweezers, carefully pull the black and white wire connectors from their sockets and move them to the side.

Step 8

  • With a Phillip’s Screwdriver, firmly but slowly remove the two screws from the top of the wireless card.
  • Be careful not to strip the nail head.

With a Phillip’s Screwdriver, firmly but slowly remove the two screws from the top of the wireless card.

Be careful not to strip the nail head.

Step 9

  • Pull the wireless card out.

Pull the wireless card out.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Phillip Winston

Member since: 03/21/2017

655 Reputation

                                      6 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges

Team

                       Texas Tech, Team S46-G3, Bennett Spring 2017                        

                                                  Member of Texas Tech, Team S46-G3, Bennett Spring 2017 



                    TTU-BENNETT-S17S46G3                     


                                            3 Members                     


                                            6 Guides authored