Difficulty

Easy

Steps

4

Time Required

                          1 week

Sections

1

  • LCD Display
  • 4 steps

Flags

0

  • BackHP Officejet 4630

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              LCD Display
  • There is a hidden screw underneath the model sticker on the front panel.
  • Peel the model sticker off the cover.
  • This will expose the T10 screw securing the panel.

There is a hidden screw underneath the model sticker on the front panel.

Peel the model sticker off the cover.

This will expose the T10 screw securing the panel.

1024

Step 2

  • Remove the single 12mm-T10 screw securing the front panel to the printer body.
  • Loosen the panel cover from the printer body.
  • There is a ribbon cable connected to the backside of the cover. Disconnect the cable before separating the panel completely.

Remove the single 12mm-T10 screw securing the front panel to the printer body.

Loosen the panel cover from the printer body.

There is a ribbon cable connected to the backside of the cover. Disconnect the cable before separating the panel completely.

Step 3

  • Gently remove the No-Fuss ribbon cable from the front panel.

Gently remove the No-Fuss ribbon cable from the front panel.

Step 4

  • Remove the seven 8mm screws using the Torx T6 screwdriver.
  • Remove the motherboard from the front-panel housing.
  • The LCD display is on the opposite side.

Remove the seven 8mm screws using the Torx T6 screwdriver.

Remove the motherboard from the front-panel housing.

The LCD display is on the opposite side.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors 


                    Justin Engwall

Member since: 01/23/2018

137 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       Cal Poly, Team S18-G3, Livingston Winter 2018                        

                                                  Member of Cal Poly, Team S18-G3, Livingston Winter 2018 



                    CPSU-LIVINGSTON-W18S18G3                     


                                            4 Members                     


                                            11 Guides authored