Difficulty
Moderate
Steps
8
Time Required
15 - 30 minutes
Sections
2
- Rear Plastic Panel
- 6 steps
- Motherboard
- 2 steps
Flags
1
Better Introduction
Improve this guide by completing or revising its introduction.
BackHP Officejet J3680
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Unplug the Device
- Remove the plug from the outlet and from the back of the device
- Remove the USB Cable from your computer and from the back of the device.
Remove the plug from the outlet and from the back of the device
Remove the USB Cable from your computer and from the back of the device.
1024
Step 2
Remove Screws From Under the Control Panel
- Using your Torx T10 screwdriver, remove the screws indicated in the picture. Screws are 13mm in length.
Using your Torx T10 screwdriver, remove the screws indicated in the picture. Screws are 13mm in length.
Step 3
Remove Screws Underneath the Ink Cartridge Cover
- Using your Torx T10 screwdriver, remove the screws indicated in the picture. Screws are 13mm in length
Using your Torx T10 screwdriver, remove the screws indicated in the picture. Screws are 13mm in length
Step 4
Remove Screws from Underneath the Phone Panel
- In step 2, you removed the screw from the blue indicated area.
- Gently pop off the black cover that the phone rests on. Underneath this cover, you will find two more screws.
- Using your Torx T10 screwdriver, remove the screws indicated in the picture. Screws are 13mm in length
In step 2, you removed the screw from the blue indicated area.
Gently pop off the black cover that the phone rests on. Underneath this cover, you will find two more screws.
Step 5
Remove the Screws from the Rear of Device
Step 6
Remove Rear Plastic Panel
- Once the rear plastic panel has been removed, you are ready to replace and repair the necessary parts.
Once the rear plastic panel has been removed, you are ready to replace and repair the necessary parts.
Step 7
Remove Plugs from Main Motherboard
- Carefully unplug all of the plugs that are connected to the main motherboard indicating in the picture.
Carefully unplug all of the plugs that are connected to the main motherboard indicating in the picture.
Step 8
Remove Screws
- Using your Torx t10 screwdriver, remove the 4 screws that hold the main motherboard to the device. Screws are 13mm in length.
- Once removed, the main motherboard will be free from the device. You will notice that on the lefthand side, three of the screws hold down green wires. Make sure when replacing the motherboard that you screw these back into place.
Using your Torx t10 screwdriver, remove the 4 screws that hold the main motherboard to the device. Screws are 13mm in length.
Once removed, the main motherboard will be free from the device. You will notice that on the lefthand side, three of the screws hold down green wires. Make sure when replacing the motherboard that you screw these back into place.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
Evan
Member since: 10/20/2014
361 Reputation
3 Guides authored
Badges:
12
+9 more badges
Team
UMass Dartmouth, Team 1-1, Duarte Fall 2014
Member of UMass Dartmouth, Team 1-1, Duarte Fall 2014
UMASSD-DUARTE-F14S1G1
4 Members
6 Guides authored