Difficulty

Moderate

Steps

7

Time Required

                          15 - 20 minutes

Sections

3

  • Left Side Panel
  • 3 steps
  • Motherboard
  • 3 steps
  • CMOS Battery
  • 1 step

Flags

1

This guide has been the hard work of our awesome students and is found to be exceptionally cool by the iFixit staff.

  • BackHP Officejet Pro 8625

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Left Side Panel
  • Remove the two 11.6 mm T9 screws from the right side of the back of the printer.

Remove the two 11.6 mm T9 screws from the right side of the back of the printer.

1024

Step 2

  • Pull down the front panel to expose the screws on the front.
  • Remove the one 11.6 mm T9 screw on the left side of the front face.

Pull down the front panel to expose the screws on the front.

Remove the one 11.6 mm T9 screw on the left side of the front face.

Step 3

  • Remove the side panel by pushing down and towards the back.
  • This step may be easier if the printer is laid on its side with the left side panel facing up.

Remove the side panel by pushing down and towards the back.

This step may be easier if the printer is laid on its side with the left side panel facing up.

Step 4

              Motherboard
  • Remove the three 5.3 mm T9 screws from the motherboard.
  • Remove the one 6.7 mm T9 screw from the motherboard.

Remove the three 5.3 mm T9 screws from the motherboard.

Remove the one 6.7 mm T9 screw from the motherboard.

Step 5

  • Remove the connectors from the front and sides of the motherboard by pulling straight away from the connection.

Remove the connectors from the front and sides of the motherboard by pulling straight away from the connection.

Step 6

  • Lift the bottom of the motherboard and remove the connectors from the back.
  • Remove the motherboard.
  • There are two white connectors underneath the motherboard, remove them separately.

Lift the bottom of the motherboard and remove the connectors from the back.

Remove the motherboard.

There are two white connectors underneath the motherboard, remove them separately.

Step 7

              CMOS Battery
  • Locate the CMOS battery on the motherboard.
  • Remove the CMOS battery by pinching the top and pulling away from the motherboard.

Locate the CMOS battery on the motherboard.

Remove the CMOS battery by pinching the top and pulling away from the motherboard.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Cam Engle

Member since: 10/08/2018

507 Reputation

                                      3 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       Cal Poly, Team S13-G3, White Fall 2018                        

                                                  Member of Cal Poly, Team S13-G3, White Fall 2018 



                    CPSU-WHITE-F18S13G3                     


                                            3 Members                     


                                            7 Guides authored