Difficulty
Moderate
Steps
13
Time Required
1 - 2 hours
Sections
6
- Back Cover
- 1 step
- Battery
- 2 steps
- Fan
- 2 steps
- Wi-Fi Card
- 2 steps
- Motherboard
- 3 steps
- Keyboard
- 3 steps
Flags
Action Shots
Be an action hero! This guide needs images that better demonstrate how to perform specific actions.
Needs More Images
A few more images would make this guide’s procedures crystal clear.
Markup Mishap
This guide needs better markups. Help out by correcting or making some markup annotations.
Missed a Step
Oops! This guide is currently missing some important steps.
Incorrect Tools
Help make this guide better by using the correct tools in images and/or text.
Better Introduction
Improve this guide by completing or revising its introduction.
BackHP Omen 15-5002xx
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Cover
- Flip the laptop upside down so the backside is facing up.
- Use a spudger or your fingers to remove the thin rubber strips that are attached from the edges of the laptop.
- Remember where each thin rubber came from and set them off to the side.
- Unscrew all 14 screw with the J00 JIS Screwdriver.
Flip the laptop upside down so the backside is facing up.
Use a spudger or your fingers to remove the thin rubber strips that are attached from the edges of the laptop.
Remember where each thin rubber came from and set them off to the side.
Unscrew all 14 screw with the J00 JIS Screwdriver.
1024
Step 2
Battery
- Open the case slowly from opposite sides of the laptop.
- Use the J00 JIS screwdriver to remove eight screws securing the battery.
Open the case slowly from opposite sides of the laptop.
Use the J00 JIS screwdriver to remove eight screws securing the battery.
Step 3
- Carefully remove the battery connector that is attached to the motherboard by slowly sliding it towards the battery with two fingers.
- Remove the battery by lifting it up and out.
Carefully remove the battery connector that is attached to the motherboard by slowly sliding it towards the battery with two fingers.
Remove the battery by lifting it up and out.
Step 4
Fan
- Remove the twelve big screws with the J00 JIS screwdriver.
- Remove all eight small screws with the 1.5 flathead screwdriver.
Remove the twelve big screws with the J00 JIS screwdriver.
Remove all eight small screws with the 1.5 flathead screwdriver.
Step 5
- Carefully detach the fan connector that is attached to the motherboard by slowly sliding the connector out with two fingers.
- Remove the battery carefully.
Carefully detach the fan connector that is attached to the motherboard by slowly sliding the connector out with two fingers.
Remove the battery carefully.
Step 6
Wi-Fi Card
- Use the Phillips #00 to remove one screw securing the Wi-Fi Card.
Use the Phillips #00 to remove one screw securing the Wi-Fi Card.
Step 7
- Carefully remove the Wi-Fi Card by slowly sliding the card sideways away from the motherboard.
Carefully remove the Wi-Fi Card by slowly sliding the card sideways away from the motherboard.
Step 8
Motherboard
- Use the 1.5 flathead screwdriver and remove the twelve screws from the motherboard.
Use the 1.5 flathead screwdriver and remove the twelve screws from the motherboard.
Step 9
- Disconnect the four cables attached to the motherboard.
Disconnect the four cables attached to the motherboard.
Step 10
- Disconnect the remaining four connectors from the motherboard.
- Remove the motherboard.
Disconnect the remaining four connectors from the motherboard.
Remove the motherboard.
Step 11
Keyboard
- Remove all 51 screws using the 1.5 mm flathead screwdriver from the underside of the keyboard.
- All necessary screws are numbered from 1-51 on the side of each screw hole.
Remove all 51 screws using the 1.5 mm flathead screwdriver from the underside of the keyboard.
All necessary screws are numbered from 1-51 on the side of each screw hole.
Step 12
- Slowly pull the electricity tape off of the computer.
- You are able to replace the electricity tape or keep the tape attached with the wire.
Slowly pull the electricity tape off of the computer.
You are able to replace the electricity tape or keep the tape attached with the wire.
Step 13
- With two hands, lift the keyboards from the sides.
With two hands, lift the keyboards from the sides.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Hassan Isse
Member since: 09/01/2021
97 Reputation
1 Guide authored
Badges:
2
Team
Gateway, Team 1-1, Saknee Fall 2021
Member of Gateway, Team 1-1, Saknee Fall 2021
GCC-SAKNEE-F21S1G1
5 Members
6 Guides authored
