Difficulty

Moderate

Steps

7

Time Required

Suggest a time??

Sections

2

  • Battery
  • 5 steps
  • Micro Card Reader
  • 2 steps

Flags

Missed a Step

Oops! This guide is currently missing some important steps.

Missing Details

Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.

  • BackHP Omni 10

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Remove the back cover from the tablet.
  • The cover is securely fastened to the device and may be difficult to remove.

Remove the back cover from the tablet.

The cover is securely fastened to the device and may be difficult to remove.

1024

Step 2

  • Push the black plastic security flaps into an upward position.
  • Lift the small tab on the security strips up and peel them across the battery. They will be attached via adhesive.
  • Lift the tab on the strip up and pull it across the battery.
  • The orange strip does not fully detach from the tablet like the other three. It will only detach from one side.

Push the black plastic security flaps into an upward position.

Lift the small tab on the security strips up and peel them across the battery. They will be attached via adhesive.

Lift the tab on the strip up and pull it across the battery.

The orange strip does not fully detach from the tablet like the other three. It will only detach from one side.

Step 3

  • Unscrew the ten 3.3 mm screws securing the battery using a 00 Phillip’s head screwdriver.

Unscrew the ten 3.3 mm screws securing the battery using a 00 Phillip’s head screwdriver.

Step 4

  • Unhook the cord from the edge of the battery.
  • Pull the wire circuit out and down.

Unhook the cord from the edge of the battery.

Pull the wire circuit out and down.

Step 5

  • Lift the battery up by its edges and remove it carefully. There will be adhesive holding the battery down.

Lift the battery up by its edges and remove it carefully. There will be adhesive holding the battery down.

Step 6

              Micro Card Reader
  • Unscrew the two 3.3 mm screws using a 00 Phillip’s head screwdriver.

Unscrew the two 3.3 mm screws using a 00 Phillip’s head screwdriver.

Step 7

  • Lift and remove micro card reader board.

Lift and remove micro card reader board.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Alex Miller

Member since: 10/11/2016

318 Reputation

                                      5 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       USF Tampa, Team 1-1, Leahy Fall 2016                        

                                                  Member of USF Tampa, Team 1-1, Leahy Fall 2016 



                    USFT-LEAHY-F16S1G1                     


                                            3 Members                     


                                            10 Guides authored