Difficulty
Easy
Steps
7
Time Required
5 - 10 minutes
Sections
2
- Bottom Case
- 3 steps
- Battery
- 4 steps
Flags
0
BackHP Pavilion 11 x360
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Remove Screws
- Use the spudger to pry off the two rubber feet near the hinge of the laptop. This will reveal two hidden 9mm screws.
- You must remove eleven screws.
- Four 9mm screws with the PH0 screwdriver.
- Seven 6mm screws with the PH0 screwdriver.
Use the spudger to pry off the two rubber feet near the hinge of the laptop. This will reveal two hidden 9mm screws.
You must remove eleven screws.
Four 9mm screws with the PH0 screwdriver.
Seven 6mm screws with the PH0 screwdriver.
1024
Step 2
Remove Backing
- Use the spudger to pry the corners of the laptop near the display hinges.
- Pry around the seam of the laptop with the plastic opening tool until the backing begins to pull apart.
- When you lift the bottom cover, there is a cable connected between the motherboard and the bottom cover. Be careful not to pull the cable loose!
Use the spudger to pry the corners of the laptop near the display hinges.
Pry around the seam of the laptop with the plastic opening tool until the backing begins to pull apart.
When you lift the bottom cover, there is a cable connected between the motherboard and the bottom cover. Be careful not to pull the cable loose!
Step 3
Detach Cable
- Use the plastic opening tool to lift the white tab up at the connection.
- Pull the cable outwards.
Use the plastic opening tool to lift the white tab up at the connection.
Pull the cable outwards.
Step 4
Battery
- Remove the four 6mm screws from the battery with the PH0 screwdriver.
Remove the four 6mm screws from the battery with the PH0 screwdriver.
Step 5
- Use the spudger to pry up the blue/white speaker wires that are routed beside the battery.
Use the spudger to pry up the blue/white speaker wires that are routed beside the battery.
Step 6
- Remove the battery cable from the motherboard by gently pulling out on the black part of the cable closest to the white tab.
Remove the battery cable from the motherboard by gently pulling out on the black part of the cable closest to the white tab.
Step 7
- Remove the battery.
Remove the battery.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
27 other people completed this guide.
Author
with 5 other contributors
Natalie
Member since: 01/22/2015
934 Reputation
4 Guides authored
Badges:
19
+16 more badges
Team
Cal Poly, Team 19-9, Maness Winter 2015
Member of Cal Poly, Team 19-9, Maness Winter 2015
CPSU-MANESS-W15S19G9
4 Members
8 Guides authored
Akshay R Manohar - Jun 15, 2016
Reply
exellent and easy steps…………but……where do i buy battery…..?
mejiawilson - Nov 3, 2016
Reply
Muy bueno parece facil
Joe Consumidor - Nov 13, 2016
Reply
Great step by step explanation. Solid pictures!!! Could not have fixed this without your contribution!!!
jane coombes - Oct 18, 2017
Reply
Purchased this laptop 28/12/2015 and now its just not switching on at all. I will try the repair instructions but I think it should have lasted a bit longer, what ever the problem is. The store where I bought it have checked the cable for me to see if that was the problem and it wasn’t. They wanted £60 to send it off, to find out the issue before anything was even done. The sales assistant said it could be the battery but he said it should have lasted longer. He basically said if its the motherboard you may as well just throw it out. I am sick of paying £100’s out for electrical items that live very short lives. My daughter bought this with her own money that she had been saving. I would not purchase this make of laptop again and where do I get a replacement battery and how much is that likely to be?
FanMac - Nov 19, 2017
Reply
Very good guide, thank you!