Difficulty

Moderate

Steps

5

Time Required

                          10 - 20 minutes

Sections

3

  • Back Panel
  • 2 steps
  • Battery
  • 2 steps
  • RAM
  • 1 step

Flags

4

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Markup Mishap

This guide needs better markups. Help out by correcting or making some markup annotations.

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackHP Pavilion 14-cf0014dx

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Panel
  • Flip the device over so that the backside is facing you.
  • Remove the rubber feet to expose six screws.
  • Using the Phillips #1 screwdriver, remove six screws securing the back panel to the device.

Flip the device over so that the backside is facing you.

Remove the rubber feet to expose six screws.

Using the Phillips #1 screwdriver, remove six screws securing the back panel to the device.

1024

Step 2

  • Insert a plastic opening tool and run it along the edges of the laptop.
  • Remove the back panel from the device.

Insert a plastic opening tool and run it along the edges of the laptop.

Remove the back panel from the device.

Step 3

              Battery
  • Using the Phillips #0 screwdriver, remove the four screws securing the battery in place.

Using the Phillips #0 screwdriver, remove the four screws securing the battery in place.

Step 4

  • Lift the battery up and out and remove it from the device.

Lift the battery up and out and remove it from the device.

Step 5

              RAM
  • Using your fingers, simultaneously press the two silver clamps away from each other to release the RAM.
  • Each RAM stick will pop up at a 45 degree angle.
  • Remove the RAM from the device.

Using your fingers, simultaneously press the two silver clamps away from each other to release the RAM.

Each RAM stick will pop up at a 45 degree angle.

Remove the RAM from the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Sam Cole

Member since: 10/25/2021

813 Reputation

                                      7 Guides authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       UMass Dartmouth, Team 2-7, Sinclaire Fall 2021                        

                                                  Member of UMass Dartmouth, Team 2-7, Sinclaire Fall 2021 



                    UMASSD-SINCLAIRE-F21S2G7                     


                                            3 Members                     


                                            7 Guides authored