Hp Pavilion 14 Cf0014Dx Ssd Replacement Repair Guide

Difficulty

Moderate

Steps

6

Time Required

                          10 - 20 minutes            

Sections

3

• Back Panel
• 2 steps
• Battery
• 2 steps
• SSD
• 2 steps

Flags

4

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Markup Mishap

This guide needs better markups. Help out by correcting or making some markup annotations.

Better Introduction

Improve this guide by completing or revising its introduction.

• BackHP Pavilion 14-cf0014dx

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Back Panel               

• Flip the device over so that the backside is facing you.
• Remove the rubber feet to expose six screws.
• Using the Phillips #1 screwdriver, remove six screws securing the back panel to the device.

Flip the device over so that the backside is facing you.

Remove the rubber feet to expose six screws.

Using the Phillips #1 screwdriver, remove six screws securing the back panel to the device.

1024

Step 2

• Insert a plastic opening tool and run it along the edges of the laptop.
• Remove the back panel from the device.

Insert a plastic opening tool and run it along the edges of the laptop.

Remove the back panel from the device.

Step 3

              Battery               

• Using the Phillips #0 screwdriver, remove the four screws securing the battery in place.

Using the Phillips #0 screwdriver, remove the four screws securing the battery in place.

Step 4

• Lift the battery up and out and remove it from the device.

Lift the battery up and out and remove it from the device.

Step 5

              SSD               

• Using the Phillips #0 screwdriver, remove the single screw securing the SSD to the motherboard.

Using the Phillips #0 screwdriver, remove the single screw securing the SSD to the motherboard.

Step 6

• Carefully pull the SSD out of the slot.

Carefully pull the SSD out of the slot.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 

                    Sam Cole                     

Member since: 10/25/2021

813 Reputation

                                      7 Guides authored                  



                       Badges:
                       4







                                                        +1 more badge                           

Team

                       UMass Dartmouth, Team 2-7, Sinclaire Fall 2021                        

                                                  Member of UMass Dartmouth, Team 2-7, Sinclaire Fall 2021 



                    UMASSD-SINCLAIRE-F21S2G7                     


                                            3 Members                     


                                            7 Guides authored                     

Ernesto P Mitre M - Jan 5, 2023

Reply

Hola!, ¿cómo es el cable para el SSD (Hard drive cable L23187-001), así como su case? (Hard drive cover L23219-001) La imagen que me aparece en la red del cable es muy largo. Gracias.