Difficulty
Moderate
Steps
11
Time Required
15 - 45 minutes
Sections
3
- Battery
- 3 steps
- Laptop Case
- 5 steps
- Hard Drive
- 3 steps
Flags
0
BackHP Pavilion 15-ab243cl
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Slide the battery lock tab toward the center of the battery to the unlock position.
Slide the battery lock tab toward the center of the battery to the unlock position.
1024
Step 2
- Slide the battery release switch to the right until the battery pops out.
Slide the battery release switch to the right until the battery pops out.
Step 3
- Grabbing the top edge of the battery, rotate it toward you and then lift upward to relieve the battery from its slot.
Grabbing the top edge of the battery, rotate it toward you and then lift upward to relieve the battery from its slot.
Step 4
Laptop Case
- With the battery removed, remove both black plastic covers with a plastic opening tool. Unscrew both 7.5 mm screws from the tabs, using a PH1 screw driver. Using a plastic opening tool, pry off both covers.
With the battery removed, remove both black plastic covers with a plastic opening tool. Unscrew both 7.5 mm screws from the tabs, using a PH1 screw driver. Using a plastic opening tool, pry off both covers.
Step 5
- Remove all 16 of the 3.5 mm screws with a PH1 screwdriver and pry/slide the CD drive out of laptop.
Remove all 16 of the 3.5 mm screws with a PH1 screwdriver and pry/slide the CD drive out of laptop.
Step 6
- With the CD drive removed, unscrew the two 2mm silver screws with a PH00.
- These can strip easily, so take your time removing.
With the CD drive removed, unscrew the two 2mm silver screws with a PH00.
These can strip easily, so take your time removing.
Step 7
- Using a plastic opening tool, begin to pry edge of case away from the laptop. Work around the edges until all sides, except back, are open.
Using a plastic opening tool, begin to pry edge of case away from the laptop. Work around the edges until all sides, except back, are open.
Step 8
- On the back side of the laptop, where the battery is, there are 12 black plastic clips. Use a plastic opening tool and pry all of these clips, unlatching them from the case.
- Once clips are free, open the laptop. Rotating the case off, around the hinges, works best to remove the case.
On the back side of the laptop, where the battery is, there are 12 black plastic clips. Use a plastic opening tool and pry all of these clips, unlatching them from the case.
Once clips are free, open the laptop. Rotating the case off, around the hinges, works best to remove the case.
Step 9
Hard Drive
- Locate the hard drive and lift up to give better access to the connector.
Locate the hard drive and lift up to give better access to the connector.
Step 10
- Using a plastic opening tool or spudger, pry open the white tab to release connector.
Using a plastic opening tool or spudger, pry open the white tab to release connector.
Step 11
- Hard drive is good to go and can now be removed.
Hard drive is good to go and can now be removed.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Author
with 2 other contributors
Alexander Bicigo
Member since: 02/14/2018
942 Reputation
6 Guides authored
Badges:
13
+10 more badges
Team
USF Tampa, Team S6-G3, Eyestone Spring 2018
Member of USF Tampa, Team S6-G3, Eyestone Spring 2018
USFT-EYESTONE-S18S6G3
3 Members
7 Guides authored