Hp Pavilion 15 Au123Cl Network Card Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          15 - 20 minutes

Sections

Battery
5 steps
Network Card
3 steps

Flags

BackHP Pavilion 15-au123cl
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Battery

Make sure the laptop is off and unplugged before starting.
Using the plastic opening tool, remove the top rubber feet on the back panel as it hides one of the screws we will be removing.

Make sure the laptop is off and unplugged before starting.

Using the plastic opening tool, remove the top rubber feet on the back panel as it hides one of the screws we will be removing.

1024

Step 2

Using a PH0 screwdriver, unscrew the ten 4.4mm Phillips head screws located on the back panel.

Using a PH0 screwdriver, unscrew the ten 4.4mm Phillips head screws located on the back panel.

Step 3

Using the plastic opening tool, remove the back cover of the laptop.
It is recommended that you start with a corner and run the tool throughout the edges of the cover.
Be sure not to bend the cover by applying too much force.

Using the plastic opening tool, remove the back cover of the laptop.

It is recommended that you start with a corner and run the tool throughout the edges of the cover.

Be sure not to bend the cover by applying too much force.

Step 4

Using a PH0 screwdriver, unscrew the two 3.8mm PH0 Phillips head screws that hold the battery in place.

Using a PH0 screwdriver, unscrew the two 3.8mm PH0 Phillips head screws that hold the battery in place.

Step 5

Carefully disconnect the cable connecting the top of the battery and remove the battery.

Carefully disconnect the cable connecting the top of the battery and remove the battery.

Step 6

              Network Card

The network card is located at the top left corner of the motherboard.
Unscrew the 4.4mm PH0 Phillips screw at the top of the network card.

The network card is located at the top left corner of the motherboard.

Unscrew the 4.4mm PH0 Phillips screw at the top of the network card.

Step 7

Using the spudger, remove the two gold pins at the top of the network card.
It is recommended to gently apply a vertical force upward with the spudger.

Using the spudger, remove the two gold pins at the top of the network card.

It is recommended to gently apply a vertical force upward with the spudger.

Step 8

Lift up the network card and remove it from the motherboard connector.

Lift up the network card and remove it from the motherboard connector.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor

                    Mohammad Gardezi

Member since: 10/17/2017

1,321 Reputation

                                      6 Guides authored                  



                       Badges:
                       13







                                                        +10 more badges

Team

                       USF Tampa, Team S13-G3, Cagle Fall 2017                        

                                                  Member of USF Tampa, Team S13-G3, Cagle Fall 2017 



                    USFT-CAGLE-F17S13G3                     


                                            2 Members                     


                                            6 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team