Difficulty
Moderate
Steps
8
Time Required
30 minutes
Sections
4
- Battery
- 3 steps
- Disc Drive
- 2 steps
- Keyboard
- 1 step
- RAM
- 2 steps
Flags
1
Better Introduction
Improve this guide by completing or revising its introduction.
BackHP Pavilion 15-ay041wm
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Battery
- Place the laptop upside down.
Place the laptop upside down.
1024
Step 2
- Find the battery lock latch on the top left corner.
- Slide the latch to the right position.
Find the battery lock latch on the top left corner.
Slide the latch to the right position.
Step 3
- Find the battery release latch on the top right corner.
- Slide and hold the latch towards the left to cover the battery icon.
- Carefully slide the battery outwards.
Find the battery release latch on the top right corner.
Slide and hold the latch towards the left to cover the battery icon.
Carefully slide the battery outwards.
Step 4
Disc Drive
- Turn the laptop upside down with the base of the laptop facing you.
- Remove the grippers positioned at the top right and top left of the laptop to access the two additional screws.
- Use a 1.5mm Hex screwdriver to remove twelve 10mm screws.
Turn the laptop upside down with the base of the laptop facing you.
Remove the grippers positioned at the top right and top left of the laptop to access the two additional screws.
Use a 1.5mm Hex screwdriver to remove twelve 10mm screws.
Step 5
- Press the eject button.
- Hold and carefully slide the disc drive out of the laptop.
Press the eject button.
Hold and carefully slide the disc drive out of the laptop.
Step 6
Keyboard
- Using the Jimmy, create a separation between the keyboard and bottom panel.
- Slide around the body of the panel until the separation is big enough for you to use .your fingers.
- Separate the keyboard and bottom panel.
Using the Jimmy, create a separation between the keyboard and bottom panel.
Slide around the body of the panel until the separation is big enough for you to use .your fingers.
Separate the keyboard and bottom panel.
Step 7
RAM
- Orient the base of the laptop with the base facing away from you.
- With you index finger and thumb, position your thumb underneath both latches on either side of the RAM and squeeze outwards.
- Simultaneously, use your index finger to push the RAM sticks towards you.
- The RAM stick will release and pop up and out.
Orient the base of the laptop with the base facing away from you.
With you index finger and thumb, position your thumb underneath both latches on either side of the RAM and squeeze outwards.
Simultaneously, use your index finger to push the RAM sticks towards you.
The RAM stick will release and pop up and out.
Step 8
- Repeat the same process for the top RAM stick.
- The RAM stick will release and pop up. Pull the RAM stick out to remove it from the laptop.
Repeat the same process for the top RAM stick.
The RAM stick will release and pop up. Pull the RAM stick out to remove it from the laptop.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Carlton Makini
Member since: 01/30/2020
195 Reputation
1 Guide authored
Badges:
4
+1 more badge
Team
York University, Team S1-G2, Woodhouse Winter 2020
Member of York University, Team S1-G2, Woodhouse Winter 2020
YORK-WOODHOUSE-W20S1G2
3 Members
4 Guides authored
