Hp Pavilion 15 Ca2073Cl Sd Card Reader Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          15 minutes

Sections

Back Cover
2 steps
Battery
1 step
SD Card Reader
3 steps

Flags

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Better Introduction

Improve this guide by completing or revising its introduction.

BackHP Pavilion 15-cs2073cl
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Video Overview

Step 1

              Back Cover

Before beginning, make sure the laptop is completely turned off by pressing the off button and waiting for the screen to turn black.
Flip the laptop over.
Remove all the 6.5mm screws (black) and the 4.8mm long screws (silver) using the Phillips #00 screwdriver.

Before beginning, make sure the laptop is completely turned off by pressing the off button and waiting for the screen to turn black.

Flip the laptop over.

Remove all the 6.5mm screws (black) and the 4.8mm long screws (silver) using the Phillips #00 screwdriver.

1024

Step 2

Use an iFixit opening tool to wedge in between the case and the body of the laptop.
Start from the front and work down both sides, disconnecting clips.
Remove the bottom case from the body.

Use an iFixit opening tool to wedge in between the case and the body of the laptop.

Start from the front and work down both sides, disconnecting clips.

Remove the bottom case from the body.

Step 3

              Battery

Remove six 4.8mm screws (silver) using the Phillips #00 screwdriver.

Remove six 4.8mm screws (silver) using the Phillips #00 screwdriver.

Step 4

              SD Card Reader

Use a spudger to flip up the retaining flap securing the ribbon cable
Remove the white ribbon cable from its connector.

Use a spudger to flip up the retaining flap securing the ribbon cable

Remove the white ribbon cable from its connector.

Step 5

Remove the single silver 4.3 mm screw with a Phillips #0 screwdriver.

Remove the single silver 4.3 mm screw with a Phillips #0 screwdriver.

Step 6

Remove the SD card reader from the laptop.

Remove the SD card reader from the laptop.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors

                    Hunter Hamilton

Member since: 09/20/2021

125 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Team

                       The Citadel Military College of South Carolina, Team 1-8, Eggleston Fall 2021                        

                                                  Member of The Citadel Military College of South Carolina, Team 1-8, Eggleston Fall 2021 



                    CMCSC-EGGLESTON-F21S1G8                     


                                            4 Members                     


                                            3 Guides authored

Action Shots#

Needs Better Images#

Better Introduction#

Introduction#

What you need#

Video Overview#

Team#