Hp Pavilion 15 P046Nr Integrated Keyboard Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          5 minutes

Sections

Battery
2 steps
Integrated Keyboard
5 steps

Flags

BackHP Pavilion 15-p046nr
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Battery

Flip the laptop over so the bottom is facing up.
Place your finger on the top left-hand slide button with the lock symbol.
Moving the slide does require some force.
Slide the button to the right so that an unlocked symbol is visible.

Flip the laptop over so the bottom is facing up.

Place your finger on the top left-hand slide button with the lock symbol.

Moving the slide does require some force.

Slide the button to the right so that an unlocked symbol is visible.

1024

Step 2

Place your finger or thumb on the top right-hand slide with the battery symbol visible.
Slide the button to the left.
Moving the slide will require some force.
Lift the battery off the computer with your thumb.
You will not need to slide the right button with the battery to reinstall the battery.

Place your finger or thumb on the top right-hand slide with the battery symbol visible.

Slide the button to the left.

Moving the slide will require some force.

Lift the battery off the computer with your thumb.

You will not need to slide the right button with the battery to reinstall the battery.

Step 3

              Integrated Keyboard

Remove screw covers from the hinge covers on the upper left and right side.
Unscrew one 7 mm screw from each hinge cover using the Phillips #00 screwdriver.
Remove hinge covers by pulling up and out on the top of the cover.

Remove screw covers from the hinge covers on the upper left and right side.

Unscrew one 7 mm screw from each hinge cover using the Phillips #00 screwdriver.

Remove hinge covers by pulling up and out on the top of the cover.

Step 4

Remove thirteen 7 mm screws from the back panel using the Phillips #00 screwdriver.
Remove three 5 mm screws from the back panel using the Phillips #00 screwdriver.
Grab the disk drive on the left side and pull the disk drive out completely.
Flip the laptop over and open the display.

Remove thirteen 7 mm screws from the back panel using the Phillips #00 screwdriver.

Remove three 5 mm screws from the back panel using the Phillips #00 screwdriver.

Grab the disk drive on the left side and pull the disk drive out completely.

Flip the laptop over and open the display.

Step 5

Run the plastic opening tool along the entire edge of the keyboard to separate the keyboard from the base of the laptop.
Gently lift the keyboard tray up.
Use care to lift the keyboard off of the device. The keyboard is still attached by ribbon cables.

Run the plastic opening tool along the entire edge of the keyboard to separate the keyboard from the base of the laptop.

Gently lift the keyboard tray up.

Use care to lift the keyboard off of the device. The keyboard is still attached by ribbon cables.

Step 6

Use the tip of the blue plastic opening tool to gently flip-up the grey locking flap of the two ribbon cables connecting the keyboard to the device.
Make sure to only lift the flap and not the connector socket because the socket easily breaks off.
Grab the ribbon cable and gently pull away from the socket.
To reinstall, insert the ribbon cable into the connector and close the flap on the black line.

Use the tip of the blue plastic opening tool to gently flip-up the grey locking flap of the two ribbon cables connecting the keyboard to the device.

Make sure to only lift the flap and not the connector socket because the socket easily breaks off.

Grab the ribbon cable and gently pull away from the socket.

To reinstall, insert the ribbon cable into the connector and close the flap on the black line.

Step 7

Lift the keyboard up and away from the device.
Removing the keyboard exposes the motherboard and its sensitive components. Ensure no tools or items are set on the motherboard or it could cause damage.

Lift the keyboard up and away from the device.

Removing the keyboard exposes the motherboard and its sensitive components. Ensure no tools or items are set on the motherboard or it could cause damage.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor

                    Sarah Ketchersid

Member since: 09/20/2019

274 Reputation

                                      1 Guide authored                  



                       Badges:
                       12







                                                        +9 more badges

Team

                       Embry-Riddle Aeronautical University, Team S2-G2, Watkins Fall 2019                        

                                                  Member of Embry-Riddle Aeronautical University, Team S2-G2, Watkins Fall 2019 



                    ERAU-WATKINS-F19S2G2                     


                                            4 Members                     


                                            9 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team