Hp Pavilion 17 E146Us Screen Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          25 minutes

Sections

Screen
6 steps

Flags

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

BackHP Pavilion 17-e146us
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

Replacing the screen could cause damage to the motherboard, so remove with caution. For more information on the causes of a faulty screen, please see our troubleshooting page.

What you need

Step 1

              Screen

Open the laptop.
Remove the two stickers on the lower left and right-hand corner of the laptop screen.

Open the laptop.

Remove the two stickers on the lower left and right-hand corner of the laptop screen.

1024

Step 2

Using a Phillips #0 screwdriver, remove the two 5 mm screws in the lower left and right-hand corner of the laptop screen.

Using a Phillips #0 screwdriver, remove the two 5 mm screws in the lower left and right-hand corner of the laptop screen.

Step 3

Place a spudger or opening tool between the laptop screen and the plastic laptop frame.
Apply light pressure to the spudger to separate the plastic laptop frame covering the edges of the laptop screen.
These silver pieces cover the laptop hinges and will need to be removed as well.

Place a spudger or opening tool between the laptop screen and the plastic laptop frame.

Apply light pressure to the spudger to separate the plastic laptop frame covering the edges of the laptop screen.

These silver pieces cover the laptop hinges and will need to be removed as well.

Step 4

Using a Phillips #0 screwdriver, remove the four 4 mm screws in each corner of the laptop screen.
This will separate the laptop cover from the laptop screen frame.
Hold the laptop cover securely to prevent damage.

Using a Phillips #0 screwdriver, remove the four 4 mm screws in each corner of the laptop screen.

This will separate the laptop cover from the laptop screen frame.

Hold the laptop cover securely to prevent damage.

Step 5

Using a Phillips #0 screwdriver, remove the four 3 mm screws on the side of the frame, one in each corner.
This will release the laptop screen from the frame.
Hold the laptop screen and frame securely to prevent damage to the motherboard attachments.

Using a Phillips #0 screwdriver, remove the four 3 mm screws on the side of the frame, one in each corner.

This will release the laptop screen from the frame.

Hold the laptop screen and frame securely to prevent damage to the motherboard attachments.

Step 6

Remove laptop screen.
While removing the laptop screen, be careful not to destroy the tape connection or break the motherboard.

Remove laptop screen.

While removing the laptop screen, be careful not to destroy the tape connection or break the motherboard.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 5 other contributors

                    Emma Neumann

Member since: 09/04/2019

629 Reputation

                                      5 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       University of Alabama, Team S2-G7, Bedsole Fall 2019                        

                                                  Member of University of Alabama, Team S2-G7, Bedsole Fall 2019 



                    UA-BEDSOLE-F19S2G7                     


                                            3 Members                     


                                            5 Guides authored

Incorrect Tools#

Introduction#

What you need#

Team#

Incorrect Tools

Introduction

What you need

Team