Hp Pavilion 17 F127Ds Speakers Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          10 minutes

Sections

Battery
1 step
Keyboard
2 steps
Speakers
2 steps

Flags

BackHP Pavilion 17-f127ds
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

There is no specific training required before executing the guide. To avoid causing any damages, be sure to turn off your laptop before beginning this guide. Make sure you have all of the necessary tools and be careful when going through each step.

What you need

Step 1

              Battery

Before starting, please turn off your laptop.
Slide the battery lock latch, the latch on the left, inwards.
Slide the battery release latch on the right inwards to release the battery.
The latch may require significant force to slide.
Lift the battery up and remove it from computer.

Before starting, please turn off your laptop.

Slide the battery lock latch, the latch on the left, inwards.

Slide the battery release latch on the right inwards to release the battery.

The latch may require significant force to slide.

Lift the battery up and remove it from computer.

1024

Step 2

              Keyboard

Flip your laptop over on a firm surface.
Using a Phillips #1 screwdriver, remove the thirteen screws on the back of your laptop.
Flip your laptop back over.

Flip your laptop over on a firm surface.

Using a Phillips #1 screwdriver, remove the thirteen screws on the back of your laptop.

Flip your laptop back over.

Step 3

Using the opening tools, separate the keyboard from the laptop by prying it from the base along the sides of the laptop.
With your fingers, disconnect the keyboard connector and the connector cable from the motherboard.
Be careful not to lift the keyboard too high because it might rip off the connectors.
Carefully remove the keyboard.

Using the opening tools, separate the keyboard from the laptop by prying it from the base along the sides of the laptop.

With your fingers, disconnect the keyboard connector and the connector cable from the motherboard.

Be careful not to lift the keyboard too high because it might rip off the connectors.

Carefully remove the keyboard.

Step 4

              Speakers

Disconnect the tape connecting the WLAN module to the main board.
With a Phillips #0 screwdriver remove the remaining screw holding the speaker in place.

Disconnect the tape connecting the WLAN module to the main board.

With a Phillips #0 screwdriver remove the remaining screw holding the speaker in place.

Step 5

Disconnect the speakers from the main board.
Lift away the speakers, they are connected with a wire.

Disconnect the speakers from the main board.

Lift away the speakers, they are connected with a wire.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors

                    Stephen Brown

Member since: 10/18/2017

201 Reputation

                                      2 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       UW Tacoma, Team S3-G1, Liner Fall 2017                        

                                                  Member of UW Tacoma, Team S3-G1, Liner Fall 2017 



                    UWT-LINER-F17S3G1                     


                                            5 Members                     


                                            4 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team