Hp Pavilion 17 Ts Ram Replacement Repair Guide

Difficulty

Moderate

Steps

3

Time Required

                          30 seconds - 1 minute            

Sections

• Battery
• 1 step
• Rear Cover
• 1 step
• RAM
• 1 step

Flags

1

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

• BackHP Pavilion 17-e160us

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery               

• Press and hold the release switch, and then slide the battery out. Insert the new battery into the slot and you’re done!

Press and hold the release switch, and then slide the battery out. Insert the new battery into the slot and you’re done!

1024

Step 2

              Rear Cover               

• In the battery compartment, find the phillips screw that is holding the rear panel onto the computer. Unscrew it.
• With the battery compartment closest to you, push the panel away from you. Once it slides back until it stops, gently lift it and put it to the side.
• Please note that this particular screw does not completely come out, it stays with the rear panel and that is ok.

In the battery compartment, find the phillips screw that is holding the rear panel onto the computer. Unscrew it.

With the battery compartment closest to you, push the panel away from you. Once it slides back until it stops, gently lift it and put it to the side.

Please note that this particular screw does not completely come out, it stays with the rear panel and that is ok.

Step 3

              RAM               

• On each side of each RAM card, there will be a thin strip of metal that is holding the chip down. Using tweezers or another thin tool, gently push these pins apart.
• The first RAM card should pop up on its own. Gently remove this card, and look for the two strips of metal holding the bottom card down.
• Push the pins apart just like for card one. Just like the first card, this one will pop up and you can remove it.

On each side of each RAM card, there will be a thin strip of metal that is holding the chip down. Using tweezers or another thin tool, gently push these pins apart.

The first RAM card should pop up on its own. Gently remove this card, and look for the two strips of metal holding the bottom card down.

Push the pins apart just like for card one. Just like the first card, this one will pop up and you can remove it.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Eric Sowersby                     

Member since: 03/25/2016

413 Reputation

                                      4 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges                           

Team

                       UMass Dartmouth, Team 1-6, Miles Spring 2016                        

                                                  Member of UMass Dartmouth, Team 1-6, Miles Spring 2016 



                    UMASSD-MILES-S16S1G6                     


                                            3 Members                     


                                            9 Guides authored